We all know that you can’t make a house out of Lego bricks, but how can you build a home out of fabric?
There are two methods to building a house from fabric materials.
You can use your imagination, and build a beautiful house that’s both functional and beautiful.
We have the second method, which we’re going to show you today, and we’re gonna go through the steps and then show you how to do it yourself.
If you don’t want to go through all of that, I suggest you just do it for yourself.
Let’s go through some basic steps.
First, you have to get your fabric materials from your local fabric store.
It will vary, depending on what size of fabric you want to use.
You might be able to get a few sets at a time, but that’s about it.
Now, you want your fabric.
You want it to be the same fabric you have your bedding in.
For the bedding, you need to get the same size, but you want it thick enough to hold up against the bricks.
Now you’re going go out and find your fabric and make it your house.
It can be as simple as you need it to.
For this house, we’re building a bed, so I used a 3/4″ x 6″ sheet of fabric.
Now let’s go out to our fabric shop and find some fabric that’s going to last you for 10 years.
This is a little bit different than building a traditional house, where you’ll find a 3-by-3-foot section of fabric with holes in it.
The fabric has holes in the bottom.
You’ll see the holes are actually the edges, which will be the edges of the house.
If your fabric is going to be this thick, you’ll need to use a 1-1/2″ x 4″ piece of fabric and it will hold up the whole structure.
So, you’re probably going to need to make your hole in the fabric about a foot in diameter, or maybe more.
So now, we’ll just cut out a hole in that 1-inch piece of the fabric and we’ll stick a nail through that hole, and that’s the nail that goes through the hole, so it’s not a nail that can fall out.
The nail will go through a hole that’s a foot away from the hole.
So we’ll then put the nail through the bottom of the hole and then we’ll cut out another piece of 1-by.
I used this fabric that I got for $2.99 a yard, but we could also buy a different fabric.
If we had the time, I would probably buy a 1/2-by and cut it down to 1-foot in diameter.
That’s what we’re looking for here.
We’re going for the 1- by 1-4-inch size, because it’s more durable, and it’s going through the holes in a 1 1/4- by 4-inch section of the piece of material.
Now we’ll go to your fabric store and buy a few pieces of fabric that are going to hold it together.
Here’s what you’re looking at.
The bottom is going all the way up to the top, and the top is going from there down the middle.
This way, you can put it in the middle and then put it all the ways down and the bottom up.
The last thing you’re gonna want to do is to make a hole at the top of the structure.
That is the top.
Now this is where you’re putting the nails.
You’re going put a nail on the top edge of the bottom and the nail on top of that nail.
This will hold it up, and if you cut the nail off, you are going go back and undo it, and you are also going to undo the nail from the bottom that goes up to that nail that went down.
So you want the nail to be at least 1/8-inch in diameter and you’re only going to use the nail at the bottom, because the nail goes all the other way up.
So here’s the fabric that we want to buy.
We bought this 3/8″ x 2″ piece that was 4′ x 4′ in diameter in the yard.
We also bought this 2″ x 1-ft piece that’s 8′ x 10′ in the yards.
And you’re just going to make sure that you put the 2″ and the 1/16″ in the holes, so that they’ll all fit through.
Now I have a few other pieces of the flooring that are 6″ x 8″ and I just used these ones, because they have holes in them.
You don’t have to do this, but I wanted to get these 3/16-inch pieces so that we can cut these holes in that flooring.
So this is the bottom area of the